Foam control agent for water-based gloss paints and wood coatings

Click here for sales tool.

  • Physical Characteristics

    AppearanceWhite emulsion
    Chemical typeEmulsion of modified silicones
    Water miscibilityHigh dispersibility
    FluidityViscosity not greater than 1500cPs @ 20° DIN 53019 100rpm
    CleanlinessNo particles after screening through a 400μm aperture screen
    Specific gravity @20°C 0.98 – 1.02 g/ml
    Active content~21 %

    *This information shows typical properties and does not constitute a specification.

  • Features

    • Excellent defoamer
    • Good compatibility
    • Effective at low concentrations
    • Helps with process productivity

     

     

  • Applications

    • Water-based gloss paints
    • Water-based wood coatings
    • Adhesives, inks, and polymer latex systems
    • Many aqueous systems

  • Dosage

    Borchi® Burst DFS 600 is usually added as received. It can be added at any time during production. In most cases the addition should be split between pigment grind and the let-down. A typical addition level would be between 0.1% and 0.5% in total depending on the severity of the foam problem. The optimum quantity and points of addition are determined by laboratory trials.

  • Storage

    Store in closed containers. Avoid extremes of temperature, keep between 5°C and 30°C. Avoid freezing and do not store in direct sunlight. Product has a shelf life of 12 months, however during this time period some phasing may occur. Remixing will ensure the product is suitable for use.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Multimedia