Borchi^® Boost 570WS color booster improves color acceptance for ready made dispersions and tinting systems in a wide range of basecoats.

Control Borchi^® Boost

Physical Characteristics
Appearance Liquid, yellow-orange
Non-volatile content 100 %
pH 8 – 10 (aqueous
solution 10 %)
Density 1.06 – 1.10 g/cm3
Viscosity Max. 50,000 cPs
Solvent(s) NA
Features
• Improves color acceptance in medium to low polarity
systems
• Strengthens tints with organic pigment dispersions and
carbon blacks
• Reduces or eliminates color rubout
• 100% solid
• Can be incorporated as a post-add to the basecoat
• APEO- and VOC-free
Applications
• Solvent basecoats
• Organic pigment dispersions
• Carbon blacks
Dosage
1 – 3 % on basecoat.
Storage
Protect from the effects of weather and store at temperatures between 15 and 30 °C. Turbidity and flocculation may occur if Borchi^® Boost 570WS is exposed to temperatures below 15 °C. This effect is reversible and does not affect its potency.
Warm the material to room temperature and mix well before using. If its viscosity has also increased and it is difficult to handle the material must be heated to 50 °C to return the viscosity to normal. Once opened, containers should be resealed immediately after each removal of the product.
Safety
Please refer to our safety data sheet for information relating to product safety.
Article
Click here for our article on “Overcoming Color Performance Challenges with Novel Post-Addition Colorant Solutions”
Testing Plan
Click here for our color boost product testing plan.

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Borchi® Boost 570WS

Borchi® Boost 510W