Strontium drier

  • Physical Characteristics

    AppearanceClear, middle-viscous, colorless to yellowish liquid
    Metal contentSr: 9.80 – 10.20 %
    Non-volatile content57.00 – 69.00 % ISO 3251 (2g, 3h, 105°C)
    ViscosityMax. 500 mPa·s ISO 3219 (A) (20 °C)
    Specific gravityNA
    Density0.950 – 0.990 g/cm³ DIN 51757 (20 °C)
    SolventWhite-spirit containing <1 % aromatics

  • Features

    • Only used in combination with primary drier such as cobalt or manganese
    • Enhances through-drying
    • Ensures better film properties
    • Ideal auxiliaries for systems containing no heavy metals

  • Applications

    • Alkyd systems, especially with high solids content

  • Dosage

    The average addition is between 0.2 and 0.5 % strontium, calculated on the solid binder. The exact addition for individual formulations must be determined by preliminary trials.

  • Storage

    Protect from the effects of weathering and store at temperatures below 50 °C.

    Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].