Cobalt drier for solvent-based systems.

  • Physical Characteristics

    AppearancePurple liquid
    Metal contentCo: 11.90 – 12.10 % Cu: <= 100 ppm
    Non-volatile content60.00 – 68.00 % ASTM D 1644
    ViscosityA-5 to A ASTM D 2373
    Specific gravity8.20 – 8.60 lb/gal (25°C) ASTM D 1963
    DensityNA

  • Features

    • Shortens the surface drying of coatings, varnishes, stains and inks
    • Results in uniform through-drying of the paint film when used in combination with a secondary drier such as zirconium, barium or zinc
    • Catalyzes redox reactions which result in the dissociation of hydroperoxides from a change in valence from Co2+ to Co3+
    • Rapid surface drying

  • Applications

    • Oxidatively cured solvent-based systems, including:
      • Architectural paints
      • Industrial coatings
      • Stains
      • Oil-based inks
      • Artists’ colors

  • Dosage

    In conventional alkyd formulations, the cobalt addition is between 0.03 and 0.08 % metal based on the vehicle solids of the coating and will vary upon the composition of the binder. In printing inks, a combination of Cobalt and Manganese driers is recommended. The amount of cobalt is between 0.03 and 0.05 % based on binder solids. Cobalt driers can also be combined with Zirconium and Calcium driers for optimum surface and through dry. The specific drier blend should be experimentally determined.

  • Storage

    Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each use.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :
  • Europe : EINECS
  • USA : TSCA
  • Canada : DSL
  • Australia : AICS
  • New Zealand : NZIoC
  • China : IECSC
  • Japan : ENCS/METI
  • Korea : ECL
  • Philippines : PICCS
Multimedia