Manganese drier for solvent-based systems

  • Physical Characteristics

    AppearanceBrown liquid
    Metal contentMn: 11.80 – 12.20 %
    Non-volatile content61.00 – 69.00 % ASTM D 1644
    ViscosityA-5 to F ASTM D 2373
    Specific gravity1.020 – 1.044 g/cm3(25°C) ASTM D 1963
    DensityNA

     

  • Features

    • Promotes surface and through-drying properties
    • Usually used in combination with cobalt
    • Can be used with secondary driers like zirconium, barium or zinc for complete drying of the paint film
    • More suitable in pigmented coatings systems as it may cause discoloration in pale-colored or clear coatings

  • Applications

    • Pigmented coatings
    • Architectural paints
    • Industrial coatings
    • Stains

  • Dosage

    In conventional alkyd formulations, the Manganese addition is between 0.01 and 0.05 % metal based on the vehicle solids of the coating and will vary depending upon the composition of the binder. 12% Manganese Hex-Cem® LC can also be combined with Zirconium and Calcium driers for optimum surface and through dry. The specific drier blend should be experimentally determined.

  • Storage

    Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each use.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :
  • Europe : EINECS
  • USA : TSCA
  • Canada : DSL
  • Australia : AICS
  • New Zealand : NZIoC
  • China : IECSC
  • Japan : ENCS
  • Korea : ECL
  • Philippines : PICCS
Multimedia