Dispersant for Automotive and Industrial Coatings
Borchi® Gen 1451 is a high molecular weight APEO-free dispersant for organic pigments and carbon black in high performance solvent-based automotive and industrial coatings.
Benefits of Organic / Carbon Black Dispersants for Automotive and Industrial Coatings
Borchi® Gen 1451 provides high transparency, low viscosity dispersions for organic pigments, and long-term dispersion stability. This dispersant also provides high performance for carbon black pigments in automotive and industrial paint.
Borchi® Gen 1451 dispersant effective disperses organic pigments, including high performance automotive and industrial paint with carbon black pigments
Along with high performance automotive and industrial coatings, Borchi® Gen 1451 works well in decorative protective and marine coatings. This dispersant also works well in printing inks.
Appearance Liquid, yellow Non-volatile content 28 – 32 % pH 8 – 10 (10 % in aqueous solution) Density 1.09 – 1.14 g/cm3 Viscosity Max. 500 mPa.s Solvent(s) Ethylene glycol diacetate
- Specifically designed for dispersing difficult organic pigments and carbon black
- Low viscosity dispersions
- High transparency with organic pigments
- High jetness with carbon black
- Long-term dispersion stability
- Compatible with a wide range of resin systems
- Protective and Marine
- Printing ink
The exact dosage should be experimentally determined through a ladder study. Borchi® Gen 1451 should be added to the mill base before adding the pigment. Active on pigment loading:
- Titanium dioxide: 3 – 5 %
- Inorganic pigments: 5 – 10 %
- Organic pigments: 10 – 30 %
- Carbon blacks: 30 – 80 %
- High jetness carbon blacks: 80 – 120 %
Protect from the effects of weather and store at temperatures between 5 and 30 °C. Turbidity and flocculation may occur if Borchi® Gen 1451 is exposed to temperatures below 15 °C. This effect is reversible and does not affect its potency. Warm the material to room temperature and mix well before using. If its viscosity has also increased and it is difficult to handle the material must be heated to 50 °C to return the viscosity to normal. Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
SAFETY DATA SHEET
- Europe : EINECS, EU - REACH (Registered)
- Switzerland : EINECS
- USA : TSCA
- Canada : DSL
- China : IECSC
- Japan : ENCS
- Korea : ECL
- Taiwan : NECI