Silicone-free substrate wetting additive with good flow, as well as excellent slip and over-coat ability for can and coil coatings

  • Physical Characteristics

    AppearanceClear liquid
    Non-volatile content48 – 52 % EN ISO 3251 (2h, 125 °C)
    Density0.98 g/cm3 (20 °C)
    Viscosity20 – 40 mPa.s EN ISO 12058-1 (23 °C)
    Color(Hazen) Max. 40 ISO 2211
    Refractive IndexN/A
    Solvent(s)Methoxypropyl acetate

  • Sales Tool

    Click here for sales tool.

  • Features

    • Improves substrate wetting and flow
    • Provides excellent slip without inter-coat adhesion interference
    • Can be used in most solvent-based coating systems
    • Eliminates the formation of Benard cells which eliminates flooding and floating specially for low viscosity systems

  • Applications

    • Can and coil coatings

  • Dosage

    The recommended dosage is 0.5 – 2.0 % of the total weight of the formulation depending upon the binder type. The exact dosage should be experimentally determined. Borchi® Gol 1078 is easy to use and can be added at any stage of the formulation; however, we recommend adding it near the end of the formula.

  • Storage

    Protect from the effects of weathering and light. Store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :
  • Europe : EINECS
  • USA : TSCA
  • Canada : DSL
  • Australia : AICS
  • New Zealand : NZIoC
  • China : IECSC
  • Japan : ENCS/METI
  • Korea : ECL
  • Taiwan : NECI/NCSR