Silicone-free interface active additive for improved substrate wetting, usable in solvent- and water-based systems, VOC-free, APEO-free
Appearance Clear liquid Non-volatile content 84 – 90 % ISO 3251 (2g, 1h, 105 °C) pH 7 (20 °C) Density 0.980 – 1.00 g/cm3 ISO 2811 (25 °C) Viscosity 90 – 110 mPa.s ASTM D 1638 (25 °C) Color Gardner: Max. 3 ISO 4630 Refractive Index 1.44 – 1.46 DIN 51423 (25 °C) Solvent(s) N/A
• Shows high affinity to hydrophobic surfaces
• Reduces surface tension
• Improves the wetting process
• Low-foaming tendencies in formulations
- General Industrial
Borchi® Gol 1375 used for the substrate wetting should be added to the finished system. The recommended dosage is 0.05 to 1.50 % as supplied on total formulation. The recommended level can be used for orientation. The optimal dosage is determined through a series of laboratory tests.
Protect from the effects of weathering and light. Store at temperatures between 5 and 30°C. Once opened, containers should be resealed immediately after each removal of the product. Separation of turbidity may occur at temperatures below 10 °C. This process is reversible and does not affect the product quality. Coloration may occur at temperatures over 40 °C.
Please refer to our safety data sheet for information relating to product safety.
SAFETY DATA SHEET
- Europe : EINECS, EU - REACH (Registered)
- Switzerland : EINECS
- USA : TSCA
- Canada : DSL
- New Zealand : NZIoC
- China : IECSC
- Japan : ENCS
- Korea : ECL
- Taiwan : NECI