Polyether modified polydimethyl siloxane for improved slip, flow and leveling and mar resistance properties in solvent- and water-based coatings systems, 100 % active, VOC-free
Appearance Clear liquid Non-volatile content N/A pH 4.0 – 7.2 (aqueous solution 1 %) Density 1.05 g/cm3 (25 °C) Viscosity 70 – 150 mPa.s ISO 3219 (A) (25 °C) Color Gardner: Max. 3 ISO 4630 Refractive Index N/A Solvent(s) N/A
- Inhibits the formation of surface defects like craters and pin holes
- Improves flow, leveling and slip properties of coatings
- Broad compatibility with wide variety of binders
- General Industrial
The recommended dosage is 0.05 % to 0.5 % of the total weight of the formulation depending upon the binder system. The exact dosage should be experimentally determined.
Protect from the effects of weathering and store at temperatures between 15 and 30 °C. In temperatures below 15 °C, Borchi® Gol 1474 may become hazy, show a hazy precipitate and may even solidify. This does not affect performance and can usually be recovered by storing the product at 25 °C or above 24 hours.
Please refer to our safety data sheet for information relating to product safety.
- Europe : EINECS
- Switzerland : EINECS
- USA : TSCA
- Canada : DSL
- Australia : AICS
- New Zealand : NZIoC
- China : IECSC
- Japan : ENCS
- Korea : ECL
- Taiwan : NECI
- Philippines : PICCS