Manganese drier in VOC-reduced and high-solid coatings
Appearance Clear, high-viscous, brown-red liquid Metal content Mn: 9.80 – 10.20 % ISO 4619 Non-volatile content NA Viscosity Max. 3000 mPa.s (20°C) ISO 3219 (A) Specific gravity NA Density 1.020 – 1.070 g/cm³ DIN 51757 (20 °C) Solvent Fatty acid ester
• Based on metal salts of 2-ethylhexanic acid (octoates) or their isomers
• Promotes surface- and through-drying
• Usually used with cobalt
• High atmospheric humidity severely inhibits the effect of manganese
• Pigmented coating systems
• Architectural paints
• Wood coatings
• Printing inks
• Industrial coatings
In our experience, the percentage addition of iron, calculated on the metal content per binder (solid), is approx. 0.01 – 0.05 % Mn. The exact amount required depends on the binder used.
Protect from the effects of weathering and store at temperatures between 5 and 30 °C.
Once opened, containers should be resealed immediately after each removal of the product.
Please refer to our safety data sheet for information relating to product safety.
- Europe : EINECS, EU - REACH (Registered)
- Switzerland : EINECS
- Denmark : +
- Norway : +
- USA : TSCA
- Canada : DSL
- Australia : AICS
- New Zealand : NZIoC
- China : IECSC
- Japan : ENCS
- Korea : ECL
- Taiwan : NECI
- Philippines : PICCS