Manganese drier in solvent-based systems

  • Physical Characteristics

    AppearanceClear, very high-viscous, brown-red  liquid
    Metal contentMn: 9.80 – 10.20 % ISO 4619
    Non-volatile contentNA
    ViscosityMax. 5000 mPa.s (20°C) ISO 3219 (A)
    Specific gravityNA
    Density0.990 – 1.030 g/cm³ DIN 51757 (20 °C)
    SolventParaffinic mineral oil

  • Features

    • Based on metal salts of 2-ethylhexanoic acid (octoates) or their isomers
    • Promotes surface- and through-drying
    • Usually used with cobalt
    • High atmospheric humidity severely inhibits the effect of manganese

  • Applications

    • Printing inks

  • Dosage

    In our experience, the percentage addition of manganese, calculated on the metal content per binder (solid), is approx. 0.01 – 0.05 % Mn. The exact amount required depends on the binder used.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Driers Products
View All Driers Products