Combination drier for water-based alkyd resins, recommended for drying at low temperatures and high atmospheric humidity

  • Physical Characteristics

    AppearanceClear, violet pinkish liquid
    Metal contentCo: 2.35 – 2.55 %
    Zn: 2.47 – 2.67 %
    Zr: 5.75 – 5.95 %
    DIN 55901
    Total: 10.57 – 11.17 %
    (calculated)
    Non-volatile contentNA
    ViscosityMax. 1500 mPa.s (20°C) ISO 3219 (A)
    Specific gravityNA
    Density1.040 – 1.080 g/cm³ DIN 51757 (20 °C)
    SolventFatty acid and paraffinic mineral oil

     

  • Features

    • Stable, aqueous product that can be easily incorporated
    • Mixed metal drier that develops high reactivity
    • Yields good drying properties at low temperatures and high humidity
    • Does not cause yellowing

  • Applications

    • Systems based on long-oil alkyds
    • High-build systems (> 100 μm wet)

     

  • Dosage

    The recommended addition is 4 to 6 % Borchers® Deca 421 aqua (supply form), calculated on solid resin.

  • Storage

    Protect from the effects of weathering and store at temperatures between 5 and 30 °C. Once opened, containers should be resealed immediately after each removal of the product.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].

Driers Products
View All Driers Products