Zirconium drier designed for solvent-based systems

  • Physical Characteristics

    AppearanceClear liquid
    Metal contentZr: 23.80 – 24.20 %
    Non-volatile content80.00 – 90.00 % ASTM D 1644
    ViscosityA-5 to Z ASTM D 2373
    Specific gravity1.250 – 1.290 (25°C) ASTM D 1963
    DensityNA

  • Features

    • Highly efficient secondary drier
    • Promotes through-drying properties and is used in combination with cobalt, manganese, Borchi® OXY-Coat and other surface driers
    • Improves through dry in oxidatively cured coatings primarily by the formation of coordinative bonds when hydroxyl and carboxyl groups are present
    • In comparison to other secondary driers, zirconium has better properties in terms of color, yellowing and stability

  • Applications

    • Oxidatively cured solvent-based systems, including:
      • Architectural paints
      • Industrial coatings
      • Stains

  • Dosage

    In conventional alkyd formulations, the Zirconium drier addition is between 0.05 – 0.30 % metal based on the vehicle solids of the coating and will vary depending upon the composition of the binder.

  • Storage

    Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each use.

  • Safety

    Please refer to our safety data sheet for information relating to product safety.

Registration :

For chemical inventory status, please review section 15 of the current SDS.

Click here to access the SDS portal.

For additional regulatory information, please contact [email protected].