Iron drier
Physical Characteristics
Metal content Fe: 5.90 – 6.10 % Non-volatile content 43.00 – 53.00 % ASTM D 1644 Viscosity A-5 to K ASTM D 2373 (25 °C) Specific gravity 0.900 – 0.940 (25°C) ASTM D 1963 Weight per gallon 7.50 – 7.83 lb/gal ASTM D 1963 Features
• Primary drier
• Improves through-drying
• Develops full effect at high temperatures (> 150 °C)
• Rapid surface drying
• Acts as an adhesion promoter in anti-corrosion coatingsApplications
- Coatings which dry by oxidation and are stoved at high temperatures, including:
- Oil-based baking systems for cans
- Dark-colored baking systems
- Anti-corrosion coatings
- Coatings which dry by oxidation and are stoved at high temperatures, including:
Dosage
In our experience, the percentage addition of iron, calculated on the metal content per binder (solid), is approx. 0.1 – 1.0 % Fe. The exact amount required depends on the binder used.
Storage
Protect from the effects of weathering and store at temperatures below 50 °C. Once opened, containers should be resealed immediately after each removal of the product.
Safety
Please refer to our safety data sheet for information relating to product safety.
Registration :
For chemical inventory status, please review section 15 of the current SDS.
Click here to access the SDS portal.
For additional regulatory information, please contact [email protected].
Driers Products
Driers
VIEW DETAILS »Driers
VIEW DETAILS »Driers
VIEW DETAILS »Driers
VIEW DETAILS »